Model: 52PI-EP-0107
With this ICE Tower Cooler from 52Pi you can provide a Raspberry Pi with active cooling. The heatsink is equipped with a fan that constantly blows air over the heatsink. This ensures that the Raspberry Pi remains lower in temperature than with a..
€22.75
Ex Tax:€18.80
Model: 52PI-ZP-0180
With this ICE Tower Cooler from 52Pi you can provide a Raspberry Pi 5 with active cooling. The heatsink is equipped with a fan that constantly blows air over the heatsink. This ensures that the Raspberry Pi remains lower in temperature than with a st..
€19.00
Ex Tax:€15.70
Model: 52PI-EP-0167
With this ICE Tower Cooler from 52Pi you can provide an Orange Pi 5(B) with active cooling. The heatsink is equipped with a fan that constantly blows air over the heatsink. This ensures that the temperature of the Raspberry Pi remains lower than with..
€20.00
Ex Tax:€16.53
Model: 52PI-EP-0112
With this ICE Tower Cooler from 52Pi you can provide a Raspberry Pi with active cooling. The heatsink is equipped with a fan that constantly blows air over the heatsink. This ensures that the Raspberry Pi remains lower in temperature than with a..
€22.75
Ex Tax:€18.80
Model: COOL11x11-ALUMINUM
Suitable for providing small chips with some cooling.
Let op: Deze koelblokjes hebben geen plaklaag, je kunt bijvoorbeeld thermische lijm of deze tape gebruiken om ze te monteren: Thermisch Geleidende Tape..
€0.35
Ex Tax:€0.29
Model: COOL11x11-ADH
Suitable for providing small chips with some cooling...
€0.40
Ex Tax:€0.33
Model: COOL13x12-ALUMINUM
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.35
Ex Tax:€0.29
Model: COOL13x12-ADH
Suitable for providing small chips with some cooling...
€0.40
Ex Tax:€0.33
Model: COOL14x12-GREEN
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.40
Ex Tax:€0.33
Model: COOL14x12-GREEN-ADH
Suitable for providing small chips with some cooling...
€0.45
Ex Tax:€0.37
Model: COOL15x14-BLACK
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.40
Ex Tax:€0.33
Model: COOL15x14-BLACK-ADH
Suitable for providing small chips with some cooling...
€0.45
Ex Tax:€0.37
Model: COOL15x9-ALUMINUM
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.35
Ex Tax:€0.29
Model: COOL15x9-ADH
Suitable for providing small chips with some cooling...
€0.40
Ex Tax:€0.33
Model: COOL16x10-BLUE
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.40
Ex Tax:€0.33
Model: COOL16x10-BLUE-ADH
Suitable for providing small chips with some cooling...
€0.45
Ex Tax:€0.37
Model: COOL16x15-RED
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.45
Ex Tax:€0.37
Model: COOL16x16-RED-ADH
Suitable for providing small chips with some cooling...
€0.50
Ex Tax:€0.41
Model: COOL22x22-GREY
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.50
Ex Tax:€0.41
Model: COOL22x22-GREY-ADH
Suitable for providing small chips with some cooling...
€0.55
Ex Tax:€0.45
-200x200.jpg "Aluminum Heatsink - 40x40x11mm- Anodised Black - with Adhesive")
Model: COOL40x40-BLACK-ADH
A heatsink to cool e.g. NEMA17 stepper motors. In addition, these heatsinks are also well suited for use with peltier elements...
€1.00
Ex Tax:€0.83
Model: COOL7x7-ALUMINUM
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.30
Ex Tax:€0.25
Model: COOL7x7-ADH
Suitable for providing small chips with some cooling...
€0.35
Ex Tax:€0.29
Model: COOL9x9-ALUMINUM
Suitable for providing small chips with some cooling.
Note: These cooling blocks have no adhesive layer, you can use thermal glue or this tape to mount them: Thermally Conductive Tape..
€0.30
Ex Tax:€0.25
Model: COOL9x9-ADH
Suitable for providing small chips with some cooling...
€0.35
Ex Tax:€0.29
Model: COOL11x11
Suitable for providing small chips with a little air cooling.
Material is aluminum in combination with a black thermally conducting adhesive layer of 3M...
€0.40
Ex Tax:€0.33
Model: HEATSINKLED1-3W
This cooling block is required if you want to use the corresponding 1W to 3W LED at full brightness.
These LEDs produce a lot of heat, which has to be cooled.
The LED can be soldered to the cooling block. Try to place the LED as close to the cool..
€0.20
Ex Tax:€0.17
Model: OP5PLUS-HEATSINK
Brand: Orange Pi
A large aluminum heatsink for the Orange Pi 5 Plus. The heatsink can be installed without screws and comes with a thermal pad.
Note: No Orange Pi is included...
€3.50
Ex Tax:€2.89
Model: OP-PWMHEATSINKFAN
Brand: Orange Pi
This Orange Pi product consists of a heatsink with a built-in PWM fan and is compatible with the Orange Pi 5 plus.
Note: No Orange Pi is included...
€6.00
Ex Tax:€4.96
Model: RPI5-COOLER
This Active Cooler from Raspberry Pi consists of a heatsink and a PWM cooling fan. Thermal pads have been pre-applied to the heatsink for optimal heat transfer.
Note: No Raspberry Pi is included...
€6.00
Ex Tax:€4.96
Model: RPIHEATSINKKIT
A set of cooling blocks to provide your Raspberry Pi with a little extra cooling.
This set consists of three cooling blocks incl. adhesive layer for easy placement of the cooling blocks.
Specifications:
Material: Aluminum
Dimensions:
..
€0.80
Ex Tax:€0.66
Model: WS-17790
A set of heat sinks to provide your Raspberry Pi with a little extra cooling.
This set consists of three heat sinks with an adhesive layer for easy placement of the cooling blocks.
Dimensions per colored heat sinks (approximately):
..
€1.50
Ex Tax:€1.24
Model: TO220HEATSINK
A heatsink kit for components based on the TO-220 package. The heatsink comes with mounting material.
Specifications:
Dimensions cooling block: 20 x 14.5 x 9.5 mm
Package Contents:
1x Aluminum heat sink for TO-220
1x M3x5m..
€0.80
Ex Tax:€0.66
Model: WS-23118
With this ICE Tower Cooler you can provide a Raspberry Pi 4 Model B with active cooling. The heatsink is equipped with a fan that blows air over the heatsink, the speed can be set via PWM. This ensures that the temperature of the Raspberry Pi remains..
€21.50
Ex Tax:€17.77
Model: WS-22931
This fan with heatsink is perfect for the Raspberry Pi 4B and, with the included fan adapter, you keep all IO pins for e.g. a shield. The fan features a PWM controller, allowing you to adjust the fan speed to optimally cool your Raspberry Pi.
Note..
€11.00
Ex Tax:€9.09
Showing 1 to 36 of 36 (1 Pages)