Model: TCRT5000MOD1X
With this module you can detect the proximity of an object or follow a black line using infrared light. This module works based on reflection of infrared light.
When following a line, the black line must therefore absorb infrared light (approximatel..
€2.00
Ex Tax:€1.65
Model: 3144HALL
This hall sensor is the compatible version of the A3144 hall sensor from Allegro.
You can therefore use the following datasheet: A3144 Datasheet..
€0.45
Ex Tax:€0.37
Model: TCRT5000MOD3X
With this module you can detect the proximity of an object or follow a black line using infrared light. This module works based on reflection of infrared light.
When following a line, the black line must therefore absorb infrared light (approximatel..
€4.50
Ex Tax:€3.72
Model: XYD-HEATERTHERMISTOR-P1
This heater and thermistor is suitable for the Bambu Lab P1P and P1S..
€5.75
Ex Tax:€4.75
2-4 Weeks
Model: XYD-HEATERTHERMISTOR-X1
This heater and thermistor is suitable for the Bambu Lab X1 and X1C...
€2.75
Ex Tax:€2.27
Model: TCRT5000MOD5X
With this module you can detect the proximity of an object or follow a black line using infrared light. This module works based on reflection of infrared light.
When following a line, the black line must therefore absorb infrared light (approximatel..
€7.00
Ex Tax:€5.79
Model: HY-S301
With this module you can follow a black line by using infrared light. This module works based on the reflection of infrared light.
When following a line, the black line must therefore be able to absorb infrared light (approximately 950nm).
..
€3.50
Ex Tax:€2.89
Model: MIR-3.0Y
With this module you can follow a black line by using infrared light. This module works based on the reflection of infrared light.
When following a line, the black line must therefore be able to absorb infrared light (approximately 950nm).
..
€6.00
Ex Tax:€4.96
Model: SCT013-000
Current clamp for AC voltage. The output of the sensor is a current related to input AC current (100A:0.05A ratio).
Specifications:
Input current: 0-100 A
Output current: 0-50 mA
Maximum measurable cable diameter: 13 mm
For mo..
€7.00
Ex Tax:€5.79
Model: SCT013-000V
Current clamp for AC voltage .
Specifications:
Input current: 0-100 A
Output voltage: 0-1 V
Maximum suitable cable diameter: 13 mm
For more information see the datasheet under the tab "Downloads"...
€7.00
Ex Tax:€5.79
Model: SCT013-005
Current clamp for AC voltage . ..
€7.00
Ex Tax:€5.79
Model: SCT013-010
Current clamp for AC voltage . ..
€7.00
Ex Tax:€5.79
Model: SCT013-030
Current clamp for AC voltage .
Specifications:
Input current: 0-30 A
Output voltage: 0-1 V
Maximum suitable cable diameter: 13 mm
For more information see the datasheet under the tab "Downloads"...
€7.00
Ex Tax:€5.79
Model: SCT013-050
Current clamp for AC voltage . ..
€7.00
Ex Tax:€5.79
Model: ACS712-20A
A simple current sensor that can measure both DC and AC current. When the measured current is zero, the output voltage is half the supply voltage.
See the following pages for examples using a similar module: Measure AC current by interfacing ACS71..
€4.00
Ex Tax:€3.31
2-4 Weeks
Model: GY-712-30A
A simple current sensor that can measure both DC and AC current. When the measured current is zero, the output voltage is half the supply voltage.
See the following pages for examples using a similar module: Measure AC current by interfacing ACS71..
€4.00
Ex Tax:€3.31
Model: ACS712-5A
A simple current sensor that can measure both DC and AC current. When the measured current is zero, the output voltage is half the supply voltage.
See the following pages for examples using a similar module: Measure AC current by interfacing ACS71..
€4.00
Ex Tax:€3.31
Model: ACS724MOD50A
A simple current sensor that can measure both DC and AC current. When the measured current is zero, the output voltage is half the supply voltage.
See the following pages for examples using a similar module: Measure AC current by interfacing ACS71..
€4.00
Ex Tax:€3.31
Model: ADS1115MOD
An ADC module that can measure voltage with high resolution. In addition, the module also has a built-in adjustable signal amplifier to be able to measure small voltages...
€5.50
Ex Tax:€4.55
Model: ADXL345V2
The ADXL345 is a small, low power, 3-axis accelerometer with high resolution (13-bit) measurements of up to ±16 g.
Specifications:
Chip: ADXL345
Supply voltage: 3.3-5V DC
Signal voltage: 3.3V
Works with I2C or SPI (3- or 4-wire)..
€5.00
Ex Tax:€4.13
Model: AM2320
A handy temperature sensor and humidity sensor...
€3.00
Ex Tax:€2.48
Model: AS5600MOD
An encoder module that can very accurately measure an angle of, for example, an axis by means of a magnetic field. In order for the sensor to work, the diametrically magnetized magnet must be attached to a shaft (e.g. with glue). The sensor must then..
€3.00
Ex Tax:€2.48
Model: AGS02MA
A gas sensor that can measure TVOC. The module communicates via I2C.
Specifications:
Supply voltage: 3.3 - 5.5V DC
Signal voltage: 3.3 - 5.5V (same as supply voltage)
Communication: I2C
I2C address: 0x1A
TVOC sensor:
..
€4.00
Ex Tax:€3.31
Model: AHT21B-MOD
A small temperature and humidity sensor in one.
See the following page for a library for this sensor: Adafruit AHTX0..
€3.00
Ex Tax:€2.48
Model: AHT21B-MOD-COVER
A small temperature and humidity sensor in one. This version has a protective cover...
€3.25
Ex Tax:€2.69
2-4 Weeks
Model: AHT25-MOD
A small temperature and humidity sensor in one.
See the following page for a library for this sensor: Adafruit AHTX0
Note: The pin spacing is not compatible with standard pin headers and DuPont connectors...
€3.00
Ex Tax:€2.48
Model: AM2301A
A small temperature and humidity sensor in one module...
€6.00
Ex Tax:€4.96
Model: AM2315C
A handy temperature and humidity sensor.
See the following page for a library for this sensor: AM2315C..
€13.00
Ex Tax:€10.74
Model: DHT20
A handy temperature and humidity sensor in one.
Pinout (left to right from the front):
VDD: Supply voltage
SDA: Serial Data (I2C)
GND: Ground
SCL: Serial Clock (I2C)
See the following page for a library for this sensor: DFRobot_DH..
€3.00
Ex Tax:€2.48
Model: HR202L
A humidity-sensitive resistor for measuring humidity.
Specifications:
Maximum voltage: 1.5V AC
Maximum power: 0.2mW
Operating frequency: 500Hz ~ 2kHz (1kHz recommended)
Measuring range: 20 - 95% RH
Accuracy: ±5% RH
Working temperat..
€1.00
Ex Tax:€0.83
B-Stock
B-Stock
Model: HXD-2801
A so-called ball switch can easily be used to see if something is tilted or not.
This ball switch ensures that you have contact between the pins at an angle of 45 degrees or more. (see images)
The metal ball in the tube then ensures that two contac..
€0.40
Ex Tax:€0.33
Model: SW-520DMOD
This module can detect a specific tilt of the module itself. The golden component is a ball switch. The balls in the module ensure contact at a certain angle.
The sensitivity can practically not be adjusted with the potentiometer. The ball swi..
€2.00
Ex Tax:€1.65
Model: BH1750FVI
This light sensor has a large range en can be used (for example) to adjust the backlight of an LCD screen by measuring the available lighting.
This module has a sensing range form 1 - 65535 lx.
Specifications:
Voltage (power supply and sign..
€3.50
Ex Tax:€2.89
Model: BTT-ADXL345-V1.0
The ADXL345 is a small, low power, 3-axis accelerometer with high resolution. This module is made to mount on the back of a round NEMA14 stepper motor, these motors are often used as extruder motors...
€8.50
Ex Tax:€7.02
Model: BME280MOD
A very compact barometer that works with I2C or SPI. The BME280 is an 3-in-1 module that can measure temperature, pressure and humidity.
For more information see the datasheet under the tab "Downloads".
The module can only be powered with..
€5.50
Ex Tax:€4.55
Model: BME280LVLCNV
A very compact barometer that works with I2C. The BME280 is an 3-in-1 module that can measure temperature pressure and humidty
For more information see the datasheet under the tab "Downloads".
This version includes a level converter and voltage..
€6.50
Ex Tax:€5.37
Model: BME680LVLCNV
This module has four sensors in one that can measure temperature, air pressure, humidity and air quality. The module has a built-in level converter making it easy to use with both 3.3V and 5V microcontrollers.
Specifications:
Supply voltage: 3.3 ..
€11.00
Ex Tax:€9.09
On request
Model: BMP180
A very compact barometer that works with I2C. The BMP180 is the better successor of the BMP085.
The module can be supplied through the VCC pin with 3.3V or 5V. It also has a 3.3V output ("3.3" pin). The I2C only works with 3.3V and needs a level s..
€4.00
Ex Tax:€3.31
Model: BMP280
A very compact barometer that works via I2C or SPI. The BMP280 is the better successor to the BMP180 with buildin temperature sensor and pressure sensor.
For more information see the datasheet under the tab "Downloads".
The module can only be f..
€4.00
Ex Tax:€3.31
Model: BMP388
A very compact temperature and air pressure sensor (barometer). The BMP388 is the successor to the BMP280. The module has a built-in level converter making it easy to use with both 3.3V and 5V microcontrollers.
Specifications:
Supply voltage: 3.3..
€7.50
Ex Tax:€6.20
Model: DFROBOT-SEN0447
Brand: DFRobot
Unlike inductive proximity sensors, this capacitive proximity sensor can detect both metallic and non-metallic objects. The measuring range of this sensor strongly depends on the size and conductivity of the object to be detected. In general, capacit..
€12.50
Ex Tax:€10.33
Model: SOILMOISWCABLE
With this sensor you measure the humidity of the soil. The sensor distinguishes itself from other soil moisture sensors by the capacitive measurement instead of a resistance measurement. This makes the sensor more resistant to corrosion which is why ..
€4.00
Ex Tax:€3.31
Model: SOILMOISBUZZ
Independent soil moisture sensor with built-in buzzer that gives a warning when the humidity is low.
The sensor distinguishes itself from other soil moisture sensors by the capacitive measurement instead of a resistance measurement. This makes the..
€4.50
Ex Tax:€3.72
Model: CCS811MOD
The CCS811 module is a digital gas sensor with metal oxide (MOX) gas sensor to measure "Volatile Organic Compounds" (VOCs) from the air.
This sensor is intended for indoor use in combination with a microcontroller via an I2C interface. The sensor ca..
€25.50
Ex Tax:€21.07
Model: CCS811HDC1080MOD
This module contains a CCS811 digital gas sensor and an HDC1080 humidity and temperature sensor. This sensor module is intended for indoor use in combination with a microcontroller via an I2C interface.
The CCS811 module is a digital gas sensor th..
€30.50
Ex Tax:€25.21
Model: CHIRP!I2CWCABLE
This is the I2C variant of the Chirp! Plant Watering Alarm. This variant has no buzzer, but can be read out via I2C. Examples are available for Arduino and Raspberry Pi, among others.
The sensor differs from other soil moisture sensors by the capa..
€14.50
Ex Tax:€11.98