TinyTronics Smart Home RGB LED Matrix 29x5 - WS2812E - ESP32-S3

This TinyTronics Smart Home RGB LED matrix with built-in AHT20 temperature and humidity meter gives you the ability to display measured values or other text easily and clearly. The LED matrix makes it very visible, even at a relatively long distance. In addition to displaying text, you can also turn it into a normal LED lamp or alternate the text with animations, for example. In addition, there are GPIO pins and two Grove connections available to connect additional modules. An ESPHome example configuration is available for use in combination with ESPHome, and another example for use with the Arduino IDE. See the tab "Downloads" for the example files.

There are two USB-C ports available on this product, one port for programming and the other port for power. This gives you the opportunity to test the LED matrix at full strength with the option to connect it to a computer at the same time, e.g. for programming or debugging.

There are 3D models of the case available to print yourself. This allows you to place it on a piece of furniture or mount it on the wall. The enclosures can also be purchased separately:

• Enclosure for TinyTronics Smart Home RGB LED Matrix - Standing
• Enclosure for TinyTronics Smart Home RGB LED Matrix - Wall Mounted

Note: We do not recommend running the LEDs at full brightness, as the LEDs can draw approximately 6A at full brightness, which is too much for most USB-C power supplies. In the ESPHome example we set the maximum brightness to 50%, which results in a current of approximately 700mA.

Check the tab "Downloads" for more information and/or downloads.